Reference Guide

show ap radio-database
show ap radio-database [band a|g] [group <group>] [mode access-point|air-
monitor|disabled|ht|ht-40mhz|legacy|sap-monitor] [sort-by ap-group|ap-ip|ap-name|ap-
type|switch-ip] [sort-direction ascending|descending] [start <start>] [switch <switch-ip-
addr>]
Description
Show radio information for Access Points visible to this controller.
Syntax
Parameter Description
band
Show only APs with a radio operating in the specified band.
a
Show only APs with a radio operating in the 802.11a band (5 GHz).
g
Show only APs with a radio operating in the 802.11g band (2.4 GHz).
group <group>
Show only APs associated with the specified AP group
mode
Show only APs with a radio operating in the specified mode.
access-point
Show only APs operating as access points
air-monitor
Show only APs operating as air monitors.
disabled
Show only disabled APs.
ht
Show only high-throughput APs.
ht-40mhz
Show only 40 Mhz high-throughput APs
legacy
Show only legacy (not high-throughput) APs.
sap-monitor
Show only APs operating as SAP monitors
sort-by
Sort the output of this command by a specific data column
ap-group
Sort the output of this command by AP group name
ap-ip
Sort the output of this command by AP IP address
ap-name
Sort the output of this command by AP name
ap-type
Sort the output of this command by AP model type.
switch-ip
Sort the output of this command by controller ip address
sort-direction
Select a sort direction for the output of this command
ascending
Sort the output in ascending order.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap radio-database | 831