Reference Guide

Column Description
Isotropic Radiated Power (EIRP)/Number of Clients associated with the radio
11a Mode/Chan/EIRP/Cli
802.1a radio type and mode/802.11a radio channel used by the AP/current Effective
Isotropic Radiated Power (EIRP)/Number of Clients associated with the radio.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
show ap radio-summary
show ap radio-summary {ap-name <ap-name>|dot11a|dot11g||ip-addr <ip-addr>|ip6-addr <ip6-
addr>}
Description
Show AP radios registered to this controller.
Syntax
Parameter Description
ap-name <ap-name>
Allows you to filter radio information by AP name.
dot11a
Allows you to filter 802.11a radio information.
dot11g
Allows you to filter 802.11g radio information.
ip-addr <ip-addr>
Allows you to filter radio information by IP address.
ip6-addr <ip-addr>
Allows you to filter radio information by IPv6 address.
Example
The output of the command in the example below displays statistics for the AP's radio, as well as statistics for
transmitted and received frames.
In the actual command-line interface, it will appear in a single, long table.
(host) #show ap radio-summary
APs Radios information
----------------------
Name Group AP Type IP Address Band Mode
---- ----- ------- ---------- ---- ----
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap radio-summary | 833