Reference Guide

The output of this command includes the following information:
Column Description
Country Code
Code that represents the country in which the APs will operate. The country code
determines the 802.11 wireless transmission spectrum.
Valid 802.11g
channel
Selected 802.11b/g channel available for use by an AP using the specified regulatory
domain profile. These channels are limited to those valid for the profile’s country code.
Valid 802.11a
channel
Selected 802.11a channel available for use by an AP using the specified regulatory domain
profile. These channels are limited to those valid for the country code.
Valid 802.11g 40MHz
channel pair
Selected 802.11b/g 40 MHz channel pair available for use by an AP using the specified
domain profile. These channels are limited to those valid for the profile’s country code.
Valid 802.11a 40MHz
channel pair
Selected 802.11a 40 MHz channel pair available for use by an AP using the specified
domain profile. These channels are limited to those valid for the profile’s country code.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap regulatory-domain-profile | 837