Reference Guide

840 | show ap remote debug association Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Column Description
mac
MAC address of the client.
auth
This column displays a y if the AP has been configured for 802.11 authorization frame types.
Otherwise, it displays an n.
assoc
This column displays a y if the AP has been configured for 802.11 association frame types.
Otherwise, it displays an n.
aid
802.11 association ID. A client receives a unique 802.11 association ID when it associates to
an AP.
1-int
Number of beacons in the 802.11 listen interval. There are ten beacons sent per second, so
a ten-beacon listen interval indicates a listen interval time of 1 second.
essid
Name that uniquely identifies the AP’s Extended Service Set Identifier (ESSID).
vlan-id
Identification number of the AP’s VLAN.
tunnel-id
Identification number of the AP’s tunnel.
phy
The RF band in which the AP operates:
a = 5 GHz
b, g = 2.4 GHz
assoc. time
Amount of time the client has associated with the AP, in the format hours:minutes:seconds.
num assoc
Number of clients associated with the AP.
flags
This column displays any flags for this AP. The list of flag abbreviations is included in the
output of the show ap association command.
Command History
Introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers