Reference Guide

860 | show ap spectrum channel-summary Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Column Description
Channel
An 802.11a or 802.11g radio channel.
Known APs
Number of valid APs identified on the radio channel.
UnKnown APs
Number of invalid or rogue APs identified on the radio channel.
Channel Util (%)
Percentage of the channel currently in use.
Max AP Signal
(dBm)
Signal strength of the AP that has the maximum signal strength on a channel.
Max Interference
(dBm)
Signal strength of the non-Wi-Fi device that has the highest signal strength.
SNIR (db)
The ratio of signal strength to the combined levels of interference and noise on that channel. This
value is calculated by determining the maximum noise-floor and interference-signal levels, and
then calculating how strong the desired signal is above this maximum.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Config mode on master or local
controllers
rf dot11a-radio-profilemodespectrum-
mode
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profilemodespectrum-
mode
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers