Reference Guide

aaa test-server
aaa test-server {mschapv2|pap} <server> <username> <passwd>
Description
This command tests a configured authentication server.
Syntax
Parameter Description
mschapv2
Use MSCHAPv2 authentication protocol.
pap
Use PAP authentication protocol.
<server>
Name of the configured authentication server.
<username>
Username to use to test the authentication server.
<passwd>
Password to use to test the authentication server.
Usage Guidelines
This command allows you to check a configured RADIUS authentication server or the internal database. You can
use this command to check for an “out of service” RADIUS server.
Example
The following commands adds a user in the internal database and verifies the configuration:
local-userdb add kgreen lkjHGfds
aaa test-server pap internal kgreen lkjHGfds
Authentication successful
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide aaa test-server | 87