Reference Guide

870 | show ap spectrum debug status Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap spectrum debug status
show ap spectrum debug status {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band 2.4ghz|5ghz
Description
This command shows detailed status and statistics for a spectrum monitor or hybrid AP.
Syntax
Parameter Description
ap-name <ap-name>
Name of the spectrum device for which you want to view status information.
ip-addr <ip-addr>
IP address of the spectrum device for which you want to view status information.
freq-band
2.4ghz|5ghz
View information for a specific radio type, either 2.4 GHz or 5 GHz.
Usage Guidelines
Use this command under the guidance of an Dell technical support representative to troubleshoot spectrum analysis
errors.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Config mode on master or local
controllers
rf dot11a-radio-profilemodespectrum-
mode
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profilemodespectrum-
mode
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers