Reference Guide

888 | show ap spectrum local-override Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap spectrum local-override
show ap spectrum local-override
Description
This command shows a list of AP radios currently converted to spectrum monitors via the spectrum local-override
list
Syntax
No parameters
Examples
The output of this example shows that three APs each have two radios defined as spectrum monitors.
(host) #show ap spectrum local-override
Spectrum Local Override Profile
-------------------------------
Parameter Value
--------- -----
Override Entry AP ap125 band 2ghz
Override Entry AP ap125 band 5ghz
Override Entry AP ap105 band 2ghz
Override Entry AP ap105 band 5ghz
Override Entry AP apcorp1 band 2ghz
Override Entry AP APcorp1 band 5ghz
The Value column in the output of this command includes the following information:
Parameter Description
Override Entry
Indicates that an AP radio has been added to the local override list
Value
Radio that has been added to the override list, and the band used by that radio.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Config mode on master or local
controllers
rf dot11a-radio-profilemodespectrum-
mode
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profilemodespectrum-
mode
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers