Reference Guide

902 | show ap wired-port-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap wired-port-profile
show ap wired-port-profile
Description
Shows all AP wired port profiles and their status.
Syntax
No parameters.
Example
The example below shows that the controller has three wired port profiles. The References column lists the number
of other profiles with references to the wired port profile, and the Profile Status column indicates whether the profile
is predefined. User-defined profiles will not have an entry in the Profile Status column.
(host) (config) #show ap wired-port-profile
AP wired port profile List
--------------------------
Name References Profile Status
---- ---------- --------------
default 3
NoAuthWiredPort 4 Predefined (editable)
shutdown 3 Predefined
Total:3
The following command displays information for an individual wired port profile:
(host)#show ap wired-port-profile default
AP wired port profile "default"
-------------------------------
Parameter Value
--------- -----
Wired AP profile default
Ethernet interface link profile default
AP LLDP profile default
Shut down? No
Remote-AP Backup Enabled
AAA Profile N/A
Time to wait for authentication to succeed 20 sec
The output of this command includes the following information:
Parameter Description
Wired AP profile
Name of a wired AP profile to be used by devices connecting the AP’s wired
port. The wired AP profile defines the forwarding mode and switchport
values used by the port.
Ethernet interface link profile
An Ethernet Link profile to be used by devices connecting to the AP’s wired
port profile. This profile defines the duplex value and speed to be used by the
port.