Reference Guide

Parameter Description
AP LLDP Profile
Name of an LLDP Profile associated with this wired port.
Shut Down?
Shows if the the wired AP port is enabled (no) or disabled (yes).
Remote AP Backup
Use the rap-backup parameter to use the wired port on a Remote AP for
local connectivity and troubleshooting when the AP cannot reach the
controller. If the AP is not connected to the controller, no firewall policies
will be applied when this option is enabled. (The AAA profile will be applied
when the AP is connected to controller).
AAA Profile
Name of a AAA profile to be used by devices connecting to the AP’s wired
port.
Time to wait for authentication to
succeed
Authentication timeout value, in seconds, for devices connecting the AP’s
wired port. The supported range is 1-65535 seconds, and the default value is
20 seconds.
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap wired-port-profile | 903