Reference Guide

968 | show dot1x ap-table static-wep Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show dot1x ap-table static-wep
show dot1x ap-table static-wep
Description
Shows the static WEP keys of all APs.
Syntax
No parameters.
Example
Issue this command to display the static WEP keys of all APs.
Static-WEP Key Information
--------------------------
AP-MAC Key1/Size Key2/Size Key3/Size Key3/Size
------ --------- --------- --------- ---------
Num APs: 0
The output of this command includes the following parameters:
Parameter Description
AP-MAC
AP’s MAC address
Key1/Size
WEP key 1 and its size
Key2/Size
WEP key 2 and its size
Key3/Size
WEP key 3 and its size
Key3/Size
WEP key 3 and its size
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master controllers