Reference Guide

994 | show firewall DellPowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
Stateful VOCERA Processing
VOCERA processing is disabled by default.
Stateful UA Processing
UA processing is disabled by default.
Enforce bw contracts for broadcast
traffic
If enabled, bw contracts are applied ot local subnet broadcast traffic.
Multicast automatic shaping
If enabled, enables multicast optimization and provides excellent
streaming quality regardless of the amount of VLANs or IP IGMP
groups that are used.
Clear Sessions on Role Update
If enabled, this setting clears all existing user role sessions after a user
or client roles is modified.
Enforce TCP Sequence numbers
If enabled, prevents data from passing between two clients until the
three-way TCP handshake has been performed.
AMSDU
Aggregated Medium Access Control Service Data Units (AMSDU)
packets are dropped if this option is enabled.
Session-tunnelFIB
Enables session tunnel based forwarding.
Prevent DHCPExhaustion
If enabled, this option checks for DHCP client hardware address
against the packet source MAC address. This command checks the
frame's source-MAC against the DHCPv4 client hardware address and
drops the packet if it does not match. This feature prevents a client
from submitting multiple DHCP requests with different hardware
addresses, thereby preventing DHCP pool depletion.
Session mirror IPsec
If enabled, frames are sent to IP address specified by the session-
mirror-destination option.
Related Commands
Command Description Mode
firewall
This command configures firewall options on the
controller.
Config mode
firewall cp
This command creates whitelist session ACLs Config mode
firewall cp-bandwidth-contract
This command configures bandwidth contract
traffic rate limits to prevent denial of service
attacks.
Config mode
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers