Reference Guide

996 | show firewall-cp Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show firewall-cp
show firewall-cp [internal]
Description
Displays the captive-portal (CP) firewall policies on the controller.
Syntax
No Parameters
Example
The output of this command shows the CP firewall policies.
(host) #show firewall-cp
CP firewall policies
--------------------
IP Version Source IP Source Mask Protocol Start Port End Port Permit/Deny hits
contract
---------- --------- ----------- -------- ---------- -------- ----------- ---- ----
----
ipv4 any 6 21 21 Permit 0 test
ipv4 10.10.10.10 2.2.2.2 6 8 9 Permit 0
ipv4 2:2:2:2::2 1 1 2 Permit 0
Command History
Release Modification
ArubaOS 3.4 Command introduced.
ArubaOS6.2
The IP Version parameter was added.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers