Release Notes

1001 | show ap debug radio-stats Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
Rx RTS Frames (PPS)
Rate at which RTS frames were received, in packets per second.
Rx CTS Frames
Clear To Send (CTS) frames received. This type of frame are used to
verify that a client is ready to receive information.
Rx CTS Frames (PPS)
Rate at which CTS frames were received, in packets per second.
RX PS Poll Frames
Power-Save Poll (PS-Poll) frames received. When a client exits a power-
saving mode, it transmits a PS-Poll frame to the AP to retrieve any
frames buffered while it was in power-saving mode.
RX CRC Errors
Cyclic Redundancy Check (CRC) is a data sequence that is sent with a
frame to help verify if all the data received correctly. Possible CRC
error causes include:
l Hardware malfunction
l Loose or unconnected cables
l RF interference, such as overlapping access point coverage on a
channel or interfering 2.4-GHz signals from devices like microwave
ovens
l and wireless handset phones
RX PLCP Errors
Physical Layer Convergence Protocol (PLCP) errors.
Rx Frames Dropped
Number of received frames that were dropped.
Rx PHY Events
The number of Physical Layer Events, that are not 802.11 packets,
detected by radio as part of its normal receive operation.
Rx RADAR Events
Number of times an AP detects a radar signature. Dell APs are DFS-
compliant detects a radar signature, it will change its channel.
RX Interrupts
The number of receive interrupts received by the CPU from the radio.
RX Overrun
The number of Receive FIFO overruns.
Rx undecryptable
Number of undecryptable frames received.
RX STBC Frames
Number of received frames with STBC enabled.
RX LDPC Frames
Number of received frames with LDPC enabled.
Rx data <number> Mbps
Data packets received at the specified rate (in Mbps).
Rx <number> Mbps
Packets received at the specified rate (in Mbps).
Rx data <number> Mbps
Packets received at the specified rate (in Mbps).
Rx HT <number> Mbps
Number of high-throughput packets received at the specified rate.
Rx WMM [BE]
Number of Wifi Multimedia (WMM) packets received for the following
access categories. If the AP has not transmitted packets in a category
type, this data row will not appear in the output of the command.
Rx WMM [BE]: Best Effort
Rx WMM [BK]: Background
Rx WMM [VO]: VoIP
Rx WMM [VI]: Video