Release Notes

Column Description
Min MPDU start spacing
Configured minimum time between the start
of adjacent MPDUs within an aggregate
MPDU, in microseconds.
Supported MCS set
Displays a list of Modulation Coding Scheme
(MCS) values or ranges of values to be
supported on this SSID. The MCS you choose
determines the channel width (20MHz vs.
40MHz) and the number of spatial streams
used by the mesh node.
Short guard interval in 20 MHz mode
Shows if the profile enables or disables use of
short (400ns) guard interval in 20 MHz mode.
Short guard interval in 20 MHz mode
Shows if the profile enables or disables use of
short (400ns) guard interval in 40 MHz mode.
Explicit Transmit Beamforming
Shows if Explicit Transmit Beamforming is
enabled or disabled for W-AP130 Series APs.
NOTE: If this parameter is disabled, the other
transmit beamforming configuration settings
have no effect.
Transmit Beamforming Compressed Steering
When enabled, the AP can use explicit
compressed feedback from clients to obtain a
steering matrix. (For W-AP130 Series APs
only.)
Transmit Beamforming non Compressed Steering
When enabled, the AP can use explicit
noncompressed feedback from clients to
obtain a steering matrix. (For W-AP130 Series
only)
Transmit Beamforming delayed feedback support
Shows if the AP has enabled or disabled
delayed feedback/report support in Transmit
Beamforming. (For W-AP130 Series only)
Transmit Beamforming immediate feedback support
Shows if the AP has enabled or disabled
immediate feedback/report support in
Transmit Beamforming. (For W-AP130 Series
only)
Transmit Beamforming Sounding Interval
Time interval in seconds between updates of
Transmit Beamforming channel estimation.
(For W-AP130 Series only)
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap mesh-ht-ssid-profile | 1066