Release Notes

show ap monitor stats
show ap monitor stats advanced {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>} client-
mac <client-mac>
show ap monitor stats {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>} mac <mac>
Description
Show packet, signal and channel statistics for an AP or a client.
Syntax
Parameter Description
advanced
Show advanced statistics for an AP or client.
ap-name <ap-name>
Show statistics for an AP with a specific name.
bssid <bssid>
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The
Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show data for an AP with a specific IP address by entering its IP address in
dotted-decimal format.
mac <mac>
Show data for a specific MAC address by entering the MAC address of a
client or AP.
client-mac <client-mac>
Show data for a specific client MAC address by entering the MAC address of
a client.
Example
The output of the following command shows monitoring statistics for the AP al12, and a client with the MAC
address 00:03:2a:02:6a:d7.
(host) #show ap monitor stats ap-name al12 mac 00:03:2a:02:6a:d7
Aggregate Stats
---------------
retry low-speed non-unicast recv-error frag bwidth
----- --------- ----------- ---------- ---- ------
0 0 0 0 0 0
RSSI
----
avg-signal low-signal high-signal count duration (sec)
---------- ---------- ----------- ----- --------------
51 51 51 4 50
Monitored Time:6626
Last Packet Time:585500
Uptime:585502
DoS Frames
----------
tx old-tx rx old-rx
-- ------ -- ------
0 0 0 0
Interference Baseline
---------------------
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap monitor stats | 1090