Release Notes

1121 | show ap remote debug bss-config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Column Description
type
This column shows if the BSSID is for an access point (ap) or an air monitor
(am).
fw-mode
The configured forward mode for the AP’s virtual AP profile.
l bridge: Bridge locally
l split-tunnel: Tunnel to controller or NAT locally
l tunnel: Tunnel to controller
max-cl
The maximum number of clients allowed for this BSSID.
preamble
Shows if short preambles are enabled for 802.11b/g radios. Network
performance may be higher when short preamble is enabled. In mixed radio
environments, some 802.11b wireless client stations may experience difficulty
associating with the AP using a short preamble.
MTU
Maximum Transmission Unit (MTU) size, in bytes. This value describes the
greatest amount of data that can be transferred in one physical frame.
status
Shows if this BSSID is enabled or disabled.
wmm
Shows if the BSSID has enabled or disabled WMM, also known as IEEE 802.11e
Enhanced Distribution Coordination Function (EDCF) WMM provides
prioritization of specific traffic relative to other traffic in the network.
Command History
Introduced in ArubaOS 5.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers