Release Notes

...
The output of this command includes the following information:
Column Description
Native VLAN
VLAN ID of the native VLAN.
DHCP VLAN
VLAN ID of Remote AP DHCP server used when the
controller is unreachable.
DHCP ADDR
IP Address used as DHCP Server Identifier.
DHCP POOL NETMASK
Netmask of the DHCP server pool.
DHCP POOL START
IP Address used as the start of a range of addresses
for a DHCP pool.
DHCP POOL END
IP Address used as the end of a range of addresses
for a DHCP pool.
DHCP DNS SERVER
IP Address for the DHCP DNS server.
DHCP ROUTER
IP Address for the DHCP default router.
DHCP DNS DOMAIN
Domain name for the DHCP DNS server.
DHCP LEASE
Length of DHCP DNS leases in days. If this parameter
displays a zero (0) the DHCP lease is has no defined
end.
Session ACL
Name of the ACL applied to the user session.
Session ACL name
Name of the ACL applied to the user session.
Session ACL count
Number of rules in the applied to the user session.
Session Aces
A list of the individual rules in the session ACL.
ACL 1
This parameter shows the position of an individual
ACL.
ACL1 Name
Name of the ACL in the first position.
ACL1 Count
Number of rules in the specified ACL.
ACL1 Aces
A list of the individual rules in the specified ACL.
Command History
Release Modification
ArubaOS 3.0 Command was introduced
ArubaOS 6.3 The ip6-addr parameter was introduced.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap remote debug flash-config | 1126