Release Notes

show ap spectrum debug monitors
show ap spectrum debug monitors
Description
Show a detailed description of all spectrum monitors on the controller.
Syntax
No parameters
Examples
The output of this command shows a list of available spectrum monitor or hybrid AP devices, a list of spectrum
devices currently subscribed to a spectrum client, message counters for subscribed spectrum devices and the
subscription history.
(host)# show ap spectrum debug monitors
List of Available Sensors
-----------------------------------
AP name Phy Band
------- --- ----
ap999 G 2GHz
ap999 A 5GHz
Total: 2
List of Subscriptions
---------------------
AP name Band Client IP Subscribe Time HTTPD pid Last Data Sent Send
Failed
------- ---- --------- -------------- --------- -------------- -------
----
ap123 2GHz 10.100.100.67 2010-05-18 03:49:44 PM 1711 1s 0
ap123 5GHz 10.100.100.67 2010-05-18 03:49:51 PM 1711 1s 0
Num Subscriptions: 2
Current Time: 2010-05-18 03:49:54 PM
Message Counters
----------------
AP name Band FFT Data FFT Duty Cycle Device Info Device Details Devices Seen
Channel Info
------- ---- -------- -------------- ----------- -------------- ------------ ----
--------
ap123 2GHz 4 4 1 194 1 1
ap123 5GHz 0 0 0 0 0 0
Subscription History
--------------------
Message AP/Radio/Band Client IP HTTPD Timestamp Result
pid
------- ------------- --------- ------ --------- ------
Subscribe "ap123"/1/2GHz 10.240.16.165 1701 2010-05-17 01:29:16 PM Success
Re-subscribe "ap123"/0/5GHz 10.240.16.165 1700 2010-05-17 01:29:16 PM Success
Unsubscribe-All "ap123"/-/- 10.240.16.165 1701 2010-05-17 02:44:18 PM Client
Not found
Subscribe "ap123"/1/2GHz 10.100.100.67 1716 2010-05-18 03:44:28 PM Success
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap spectrum debug monitors | 1146