Release Notes

1149 | show ap spectrum device-duty-cycle Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show ap spectrum device-duty-cycle
show ap spectrum device-duty-cycle {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band
2.4ghz|5ghz
Description
Shows the current duty cycle for devices on all channels being monitored by the spectrum monitor or hybrid
AP radio.
Syntax
Parameter Description
ap-name <ap-name>
Name of the spectrum device for which you want to view spectrum
information.
ip-addr <ip-addr>
IP address of the spectrum device for which you want to view spectrum
information.
freq-band 2.4ghz|5ghz
View information for a specific radio type, either 2.4 GHz or 5 GHz.
Usage Guidelines
The FFT Duty Cycle table in the output of this command shows the duty cycle for each radio channel. The duty
cycle is the percentage of time each device type operates or transmits on that channel. For additional details
about non-Wi-Fi device types shown in this table, see Non-Wi-Fi Interferers on page 1152.
This chart is not available for W-AP68 access points. A hybrid AP on a 20 MHz channel will see 40 MHz Wi-Fi data as
non-Wi-Fi data.
Examples
The output of this command shows that video devices sent a signal on channels 153 and 157 during 99% of
the last sample interval.
Device Duty Cycle Table (in %)
------------------------------
Device Type 149 153 157 161 165 149+ 157+
----------- --- --- --- --- --- ---- ----
Generic Interferer 0 0 0 0 0 0 0
WIFI 5 0 5 12 8 0 12
Microwave 0 0 0 0 0 0 0
Bluetooth 0 0 0 0 0 0 0
Generic Fixed Freq 0 0 0 0 0 0 0
Cordless Phone FF 0 0 0 0 0 0 0
Video 0 99 99 0 0 0 0
Audio 0 0 0 0 0 0 0
Generic Freq Hopper 0 0 0 0 0 0 0
Cordless Network FH 0 0 0 0 0 0 0
Xbox 0 0 0 0 0 0 0
Microwave Inverter 0 0 0 0 0 0 0
Cordless Base FH 5 5 5 5 5 0 0
Total:7