Release Notes

1165 | show ap spectrum interference-power Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
------------------------
Channel Noise Floor(dBm) Max AP Signal(dBm) Max AP SSID Max AP BSSID ACI(dBm)
Max Interference(dBm)
------- ---------------- ------------------ ----------- ------------ --------
---------------------
149 -91 -40 ethersphere-wpa2 00:24:6c:80:7b:c9 -77
-71
153 -63 -42 guest 00:1a:1e:87:c1:90 -63
-58
157 -92 -48 alpha 00:1a:1e:50:01:30 -74
-60
161 -94 -39 00:24:6C:C0:15:EB 00:24:6c:81:57:c8 -61
-70
165 -93 -26 sw-jfb-attack 00:1a:1e:9b:1d:c8 -74
-69
149+ -60 -40 ethersphere-wpa2 00:24:6c:80:7b:c9 -0
-58
157+ -89 -39 00:24:6C:C0:15:EB 00:24:6c:81:57:c8 -0
-60
The output of this command includes the following information:
Column Description
Channel An 802.11a or 802.11g radio channel.
Noise Floor (dBm) Current noise floor recorded on the channel.
Max AP Signal (dBm) Power level of the AP on the channel with the highest signal power.
Max AP SSID SSID of the AP on the channel with the highest signal power.
Max AP BSSID BSSID of the AP on the channel with the highest signal power.
ACI (dBm) Adjacent channel interference level detected by the spectrum device.
Max Interference Power
(dBm)
Signal strength of the non-Wi-Fi device that has the highest signal strength.
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or
local controllers