Release Notes

1229 | show crypto-local ipsec-map Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show crypto-local ipsec-map
show crypto-local ipsec [tag <ipsec-map-name>]
Description
Displays the current IPsec map configuration on the controller.
Syntax
Parameter Description
tag <ipsec-map-name>
Display a specific IPsec map.
Usage Guidelines
The command show crypto-local ipsec displays the current IPsec configuration on the controller.
Examples
The command show crypto-local ipsec-map shows the default map configuration along with any specific
IPsec map configurations.
(host) #show crypto-local ipsec-map
Crypto Map Template"sample" 5
IKE Version: 1
IKEv1 Policy: All
Security association lifetime seconds : [300 -86400]
Security association lifetime kilobytes: N/A
PFS (Y/N): N
Transform sets={default-transform }
Peer gateway: 0.0.0.0
Interface: VLAN 0
Source network: 0.0.0.0/0.0.0.0
Destination network: 0.0.0.0/0.0.0.0
Pre-Connect (Y/N): N
Tunnel Trusted (Y/N): N
Forced NAT-T (Y/N): N
Related Commands
Command Description Mode
crypto-local ipsec-map
Use this command to configure IPsec mapping
for site-to-site VPN.
Config mode