Release Notes

wifi-reassembly counters
wmm counters
Descriptions
Displays system statistics for your controller.
Syntax
Parameter Description
acl id <id-name>
Displays datapath statistics associated with a specified ACL. The ACL
index is found in the show rights command.
amsdu tx
Shows datapath AMSDU TX queue statistics
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP
application counters
Shows application counters and errors generated by applications
running on a particular AP. These include stateful firewall application
layer statistics.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP.
bridge
Shows bridge table entry statistics including MAC address, VLAN,
assigned VLAN, Destination and flag information for an AP.
ap-name <ap-name>
Name of the AP. Shows MAC address, VLAN, assigned VLANs,
destination and flags information.
counters
Shows datapath bridge table statistics such as current entries, high
water mark, maximum entries, total entries, allocation failures and
max link length.
ip-addr <ip-address>
IP address of the AP. Shows MAC address, VLAN, assigned VLANs,
destination and flags information.
table <macaddr>
Displays the current high, maximum, and total number of bridge table
entries for the Dell controller.
verbose
Displays datapath bridge details in a tabular format.
bwm table
Shows bandwidth management table entry statistics such as CPU,
contract, Bits/sec, policed, available bytes, queued bytes and packets.
cp-bwm
Displays the data path CP bandwidth management table information.
crypto counters
Displays crypto parameter statistics including crypto, IPsec, PPTP,
WEP, TKIP, AESCCM encryption and decryptions, WEP CRC, crypto
hardware, XSEC, DOT1X and L2TP information.
debug
Displays datapath debug details. These are low-level datapath details.
dma counters
DMA statistic sare displayed.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show datapath | 1252