Release Notes

Parameter Description
Crypto SendNPlusFailed
Indicates a queue overrun in the input of the encryption circuit.
IPSec Frag Failures
This counter increments when the AP detects a failure to fragment a frame
before or after IPsec encryption.
IPSec Invalid Length
The inbound IPsec frame length is verified before and after decryption. If the
frame length is found to be incorrect , this counter is incremented.
IKE Rate
When the controller firewall receives a UDP packet, it determines if the packet
is destined for an IKE (500) or IPSEC_NATT (4500) port. This counter incre-
ments when the AP receives an initial IKE packet that has an 8-byte responder
cookie defined all 0s.
Command History
Version
Description
ArubaOS 3.0 Command introduced.
ArubaOS 5.0 The tcp parameter was introduced.
ArubaOS 6.1 The crypto counters parameter now displays a number of
TKIP/AESCCM/AESGCM decriptions per priority level along with any counter
errors per priority.
The ipv6 filter option is added to the following parameters in the command:
l session
l tunnel
l user
l route-cache
l route
l ip-reassembly
ArubaOS 6.1.3.2 The debug opcode parameter was introduced. Issue this command only
under the supervision of Dell technical support.
ArubaOS 6.2 The firewall-agg-sess parameter is introduced.
The heartbeat parameter is introduced.
ArubaOS 6.3
The following parameters were introduced:
l a-msdu
l mobility
l tunnel-group
The output of the bridge ap-name parameter, displays a new flag b -
blocked by STP to indicate whether the firewall considers the port to be
blocked.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show datapath | 1262