Release Notes

show dot1x ap-table
show dot1x ap-table
Description
Shows the 802.1X AP table.
Syntax
No parameters.
Example
Issue this command to display details from the AP table.
AP Table
--------
MAC IP Essid Type AP name Vlan Enc Stations
Forwarding-Mode Profile Acl
--- -- ----- ---- ------- ---- --- -------- ---
------------ ------- ---
00:1a:1e:87:ff:c0 10.3.9.242 AP 00:1a:1e:c0:7f:fc 0 - 0
FORWARD_TUNNEL_80211 default/ 1
00:1a:1e:87:ff:d0 10.3.9.242 sw-pn-nokia AP 00:1a:1e:c0:7f:fc 0 WPA2-AES 0
FORWARD_TUNNEL_80211 default/default 1
00:1a:1e:82:ab:a0 10.3.9.220 AP monitor-124 0 - 0
FORWARD_TUNNEL_80211 default/ 1
00:1a:1e:82:ab:b0 10.3.9.220 AP monitor-124 0 - 0
FORWARD_TUNNEL_80211 default/ 1
00:1a:1e:87:ff:d1 10.3.9.242 sw-pn-t2 AP 00:1a:1e:c0:7f:fc 0 WPA2-PSK-AES 0
FORWARD_TUNNEL_80211 default/default 1
Num APs: 5
The output of this command includes the following parameters:
Parameter Description
MAC
The MAC address of the AP
IP
The IP address of the AP
Essid
The AP’s ESSID
Type
Device type
AP name
Name of the AP
Vlan
Number of VLANs associated with the specified AP
Enc
AP’s encryption method
Stations
Number of stations associated with the specified AP
Forwarding Mode
Forwarding mode used by the specified AP
Profile
AP profile
Acl
Number of ACLs this AP belongs to
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show dot1x ap-table | 1268