Release Notes

Parameter Description Range Default
global-credits
<query packets>
<response packets>
In an AirGroup network, AirGroup
devices generate excess mDNS
query and response packets. Using
this command, the controller
restricts these packets by
assigning tokens. The controller
processes these mDNS packets
based on this token value. The
controller rejects any packets
beyond this token limit. The token
renews every 15 seconds. The
renewal time is not a configurable
parameter.
15 —
15000
150
ipv6 This command enables or disables
AirGroup IPv6 support on the
controller.
— disabled
location-discovery
{disable | enable}
If enabled, AirGroup user can see
shared devices based on the user’s
proximity.
This parameter is available on the
master controller only. The master
controller pushes this AirGroup
configuration to all the applicable
local controllers.
— enabled
mdns {disable | enable}
Enable AirGroup mdns support on
the controller.
— disabled
service <STRING>
{disable | enable}
Enable or disable an AirGroup
service on the controller.
— Services enabled by
default:
l AirPlay
l AirPrint
l DIAL
Services disabled by
default:
l iTunes
l RemoteMgmt
l Sharing
l Chat
l googlecast
l allowall
l DLNA Media
l DLNA Print
static <mdns-record>
Configure the static mDNS record.
For more information, see airgroup
static mdns-record on page 132
— —
vlan <NUMBER>
Configure disallowed VLAN ID. 1 — 4049 —
Usage Guidelines
Starting from ArubaOS 6.4, AirGroup is disabled by default. For the remaining global parameters, see the
command syntax.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide airgroup | 128