Release Notes

show esi servers
show esi servers [{group-name <groupname>|{server-name <server-name>}]
Description
Show configuration information for ESI servers.
Syntax
Parameter Description
group-name
<groupname>
Include this optional parameter to display information for all ESI servers assigned to
a specific ESI group.
server-name <server-
name>
Specify an ESI server name to view configuration information for just that server.
Usage Guidelines
By default, this command displays configuration settings for all ESI servers. You can include the name of an ESI
group to view servers assigned to just that group, or specify a server name to view information for that server
only.
Example
This example below displays configuration details for the ESI server name forti_1.
(host) #show esi servers server-name forti_1
ESI Server Table
----------------
Name Trusted IP Untrusted IP Trusted s/p Untrusted s/p Group Mode NAT Port ID
---- ---------- ------------ ----------- ------------- ----- ---- -------- --
forti_1 10.168.173.2 10.168.171.3 -/- -/- default route 0 4
Flags
-----
U
Flags:
C :Datapath Download complete
U :Server Up
D :Server Down
PT:Trusted Ping response outstanding
PU:Untrusted Ping response outstanding
HT:Health Check Trusted IP
HU:Health Check Untrusted IP
FT:Trusted Ping failed
FU:Untrusted Ping failed
The output of this command includes the following information:
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show esi servers | 1294