Release Notes

1295 | show esi servers Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Column Description
Name
Name of the ESI server.
Trusted IP
Displays the server IP address on the trusted network. As an option, you can also
enable a health check on the specified address
Untrusted IP
Displays the server IP address on the untrusted network. As an option, you can also
enable a health check on the specified address
Trusted s/p
Shows the slot and port connected to the trusted side of the ESI server; slot/port
format.
Untrusted s/p
Shows the slot and port connected to the untrusted side of the ESI server.
Group
Name of the ESI group to which this server is assigned. If the server has not yet
been assigned to a group, this column will be blank.
Mode
Specifies the ESI server mode of operation: bridge, nat, or route
Nat Port
Displays the NAT destination TCP/UDP port.
ID
ID number assigned to the server when it was first defined.
Flags
This data column displays any flags associated with this server. The flag key
appears below the ESI Server Table.
Related Commands
Platforms Licensing Command Mode
esi server This command configures an ESI server. Config mode on master or local
controllers.
Command History
This command was introduced in ArubaOS 2.5.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers.