Release Notes

Parameter Description
thereby preventing DHCP pool depletion.
Stateful SIPS Processing
If disabled, disables monitoring of exchanges
between a voice over IP or voice over WLAN device
and a SIP server. This option should be enabled
only when there is no VoIP or VoWLAN traffic on the
network.
Deny Source Routing
If enabled, forwarding of IP frames with source rout-
ing with the source routing options set is dis-
allowed.
Immediate Freeback
If enabled, immediately frees buffers on W-7200
controllers. Do not enable this option unless instruc-
ted to do so by a technical support representative.
DPI Classification
If enabled, performs deep packet inspection.
STUN Based Traversal
If enabled, allows STUN- based firewall traversal.
Web Content Classification
If enabled, allows web content classification for all
HTTP traffic.
Default: disabled
Web Content Cache Miss Drop
If enabled, allows the controller to drop any
packets that do not match any web content
category or reputation levels in the controller's
internal web content cache.
Default: disabled
Related Commands
Command Description Mode
firewall
This command configures firewall options
on the controller.
Config mode
firewall cp
This command creates whitelist session
ACLs
Config mode
firewall cp-bandwidth-contract
This command configures bandwidth
contract traffic rate limits to prevent
denial of service attacks.
Config mode
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show firewall | 1304