Release Notes

1331 | show iap table Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
Status
Current status of the branch (UP/DOWN).
Inner IP
Internal VPN IP of the branch.
Assigned Subnet
Subnet mask assigned to the branch.
Assigned Vlan
VLAN ID assigned to the branch.
Key
Key for the branch, which is unique to each branch.
Bid(Subnet Name)
Branch ID (BID) of the subnet.
l In the example above, the controller displays bid-per-subnet-per-branch i.e.,
for "LA" branch, BID "2" for the ip-range "10.15.205.0-10.15.205.250" with
client count per branch "5"). If a branch has multiple subnets, it can have
multiple BIDs.
l Branches that are in UP state and do not have a Bid(Subnet Name) means
that the IAP is connected to a controller which did not assign any bid for any
subnet. In the above example, "Paris-CB:D3:16" branch is UP and does not
have a Bid(Subnet Name) information. This means that either the IAP is
connected to a backup controller or connected to a primary controller
without any distributed L2 or L3 subnets.
For more information on bid-per-subnet-per-branch and distributed L2 and L3
subnets, see the DHCP Configuration chapter of the Dell Instant Access Point
6.2.1.0-3.3 User Guide.
Related Commands
Command Description
iap del branch-key
This command removes a branch from the controller based on the branch
key.
Command History
Release Modification
ArubaOS 6.2 Command introduced
ArubaOS 6.3 The long parameter is introduced.
Command Information
Platforms
Licensing Command Mode
All platforms Base operating system, except
for noted parameters
Enable or Configuration mode on master
and local controller