Release Notes

1347 | show ids rate-thresholds-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show ids rate-thresholds-profile
show ids rate-thresholds-profile <profile-name>
Description
Show an IDS Rate Thresholds profile.
Syntax
Parameter Description
<profile-name>
Name of an IDS Rate Threshold profile.
Usage Guidelines
Issue this command without the <profile-name>parameter to display the IDS Rate Threshold profile list.
Include a profile name to display detailed configuration information for that profile.
Examples
The example below shows that the controller has three configured IDS Rate Threshold profiles.
(host) (config) #show ids rate-thresholds-profile
IDS Rate Thresholds Profile List
--------------------------------
Name References Profile Status
---- ---------- --------------
default 20
probe-request-response-thresholds 10 Predefined
test 0
Total:3
In the example above, the Reference column indicates the number of references to the profile named in the
Name column. The Profile Status column is blank unless the rule is predefined.
This example displays the configuration settings for the profile test.\
(host) (config) #show ids rate-thresholds-profile test
IDS Rate Thresholds Profile "test"
----------------------------------
Parameter Value
--------- -----
Channel Increase Time 15 sec
Channel Quiet Time 900 sec
Channel Threshold 300
Node Time Interval 15 sec
Node Quiet Time 900 sec
Node Threshold 200
The output of this command includes the following parameters:.
Parameter Description
Channel Increase Time
Time, in seconds, in which the threshold must be