Release Notes

1403 | show ip igmp Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
65 10.6.5.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.5.252 CP
disabled
1 10.6.2.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.2.252 CP
disabled
66 10.6.6.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.6.252 CP
disabled
63 10.6.3.252 255.255.255.0 00:0b:86:01:99:00 disabled disabled 10.6.3.252 CP
disabled
The output of this command includes the following parameters:
Parameter Description
VLAN
A VLAN ID number.
Addr
IP address of a VLAN router.
Netmask
Subnet mask for the IP address.
MAC Address
MAC destination address.
IGMP
Indicates if IGMP is enabled (or disabled) on the interface.
Snooping
Indicates if IGMP snooping is enabled (or disabled).
Querier
IP address of an IGMP querier.
Destination
Traffic destination.
IGMP Proxy
Indicates if IGMP proxy is enabled (or disabled).
The following example displays the current IGMP configuration settings for the controller.
(host) #show ip igmp config
IGMP Config
-----------
Name Value
---- -----
robustness-variable 2
query-interval 30
query-response-interval 100
startup-query-interval 31
startup-query-count 2
last-member-query-interval 10
last-member-query-count 2
version-1-router-present-timeout 400
version-2-router-present-timeout 400
max-members-per-group 300
quick-client-convergence enabled
ssm-range IANA standard range. 232.0.0.0/8
The output of this command includes the following parameters:
Parameter Description
robustness-variable
This variable is increased from its default level of 2 to allow for
expected packet loss on a subnetwork.