Release Notes

1413 | show ip ospf Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
DisCd Number of received packets that are discarded.
BadVer Number of received packets that have bad OSPF version number.
BadNet Number of received packets that belong to different network than the
local interface.
BadArea Number of received packets that belong to different area than the local
interface.
BadDstAdr Number of received packets that have wrong destination address.
BadAuType Number of received packets that have different authentication type than
the local interface.
BadAuth Number of received packets where authentication failed.
BadNeigh Number of received packets which didn’t have a valid neighbor.
BadPckType Number of received packets that have wrong OSPF packet type.
BadVirtLink Number of received packets that didn’t match have a valid virtual link.
Related Commands
Command Description
ip ospf Configure OSPF on the interface
router ospf Configure OSPF on the router
Command History
Release Modification
ArubaOS 3.4 Command introduced
ArubaOS 6.0 Added the options:
area, default-cost, nssa, and default-information originate always
Dell Networking W-Series
ArubaOS 6.4.x
The redistribute and rapng-vpn aggregate-routes <ip-addr> parameters
were introduced.
ArubaOS 6.3.1 The database parameter output now displays the link-state advertisement
(LSA) type.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Available in Config or Enable mode on master or
local controllers