Release Notes

ap debug dot 11r remove-key
ap debug dot 11r remove-key <sta-mac>
[ap-name <ap-name> | ip-addr <ip-addr>]
Description
This command removes the r1 key from an AP.
Syntax
Parameter Description
<sta-mac>
MAC address of the client.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-addr>
IP address of the AP.
Usage Guidelines
Use this command to remove an r1 key from an AP when the AP does not have a cached r1 key during Fast BSS
Transition roaming.
Examples
You can use the following command to remove an r1 key from an AP when the AP does not have a cached r1
key during Fast BSS Transition roaming.
(host) #ap debug dot11r remove-key <sta-mac> ap-name <ap-name> | ip-addr <ip-addr>
(host) #ap debug dot11r remove-key 00:50:43:21:01:b8 ap-name MAcage-105-GL
Execute the following command to check if the r1 key is removed from the AP:
(host) #show ap debug dot11r state ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC Mobility Domain ID Validity Duration R1 Key
----------- ------------------ ----------------- ------
Related Commands
To check if the r1 key is removed from an AP, use the show ap debug dot11r state command:
Command History
Introduced in ArubaOS 6.3.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide ap debug dot 11r remove-key | 144