Release Notes

show lldp interface
show lldp interface [fastethernet <slot/port> | gigabitethernet <slot/port>]
Description
This command displays the LLDP interfaces information.
Syntax
Parameter Description
fastethernet <slot/port>
Displays LLDP information on a fastethernet port.
gigabitethernet <slot/port>
.Displays LLDP information on a gigabitethernet interface.
Example
The example shows two commands. The output of the show lldp interface command displays information
for all LLDP interfaces.
(host) #show lldp interface
LLDP Interfaces Information
---------------------------
Interface LLDP TX LLDP RX LLDP-MED TX interval Hold Timer
--------- ------- ------- -------- ----------- ----------
GE1/3 Enabled Enabled Enabled 30 120
The following example only shows information for the GE1/3 interface.
(host) #show lldp interface gigabitethernet 1/3
Interface: gigabitethernet1/3
LLDP Tx: Enabled, LLDP Rx: Enabled
LLDP-MED: Enabled
Transmit interval: 30, Hold timer: 120
Parameter Description
Interface
Name of an LLDP interface.
LLDP TX
Shows if LLDP Protocol Data Unit (PDU) transmission is enabled or disabled.
LLDP RX
Shows if the controller has enabled or disabled processing of received LLDP
PDUs.
LLDP-MED
Shows if LLDP MED protocol is enabled or disabled.
TX interval
The LLDP transmit interval, in seconds.
Hold Timer
The LLDP transmit hold multiplier.
Command History
Release Modification
ArubaOS 6.4 Command Introduced.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show lldp interface | 1480