Release Notes

1483 | show lldp neighbor Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
Local Intf
Slot and port number.
Chassis ID
MAC address of the LLDP Peer.
Capability
Shows the capabilities of the peer to operate as a router, bridge, access
point, phone or other network device.
Remote Intf
Remote interface.
Expiry-time
Expiry time.
System Name
Name of the peer system, as supplied by the peer.
The output of the show lldp neighbor interface gigabitethernet <slot/module/port> detail
command varies, depending upon the type of LLDP peer detected. The output in the example above contains
the following information:
Parameter Description
Interface
Name of the port for which you are viewing LLDP neighbor information.
Number of Neighbors
Number of LLDP neighbors seen by the port.
Chassis id
MAC address of the neighbor device.
Management address
MAC address of the neighbor’s management port.
Interface description
Description of the LLDP neighbor interface.
ID
Interface ID of the LLDP neighbor interface.
MTU
Maximum Transmission Unit size allowed by the neighbor device in bytes.
Device MAC
Shows the MAC address of the IAP connected to the MAS port.
Last Update
Date and time the neighbor device’s status changed.
Time to live
Time, in seconds, for which this information is valid.
Expires in
Time, in seconds, before this information is considered invalid.
System capabilities
This column shows the capabilities of the peer to operate as a router,
bridge, access point, phone or other network device.
Enabled capabilities
This column if the peer has been actively configured to operate as a router,
bridge, access point, phone or other network device.
System name
Name of the peer system, as supplied by the peer.
System description
Description of the peer system, as supplied by the peer.
Auto negotiation
Shows if link auto-negotiation is enabled for the peer interface.