Release Notes

1535 | show netdestination Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show netdestination
show netdestination <netdestination name>
Description
Displays IPv4 and IPv6 network destination information.
Syntax
No parameters.
Example
Issue this command to display all netdestination configured on this controller. The output below displays
information for all configured IPv4 and IPv6 netdestinations. To display additional detailed information for an
individual netdestinations, include the name of the netdestination at the end of the command.
(host) >enable
Password:******
(host) #show netdestination
Name: white-list
Position Type IP addr Mask-Len/Range
-------- ---- ------- --------------
Name: localnetwork
Position Type IP addr Mask-Len/Range
-------- ---- ------- --------------
1 network 0.0.0.2 0.0.0.0
The output includes the following parameters:
Parameter Description
Name
Network destination name
Position
Network destination position
Type
Network destination type
IP addr
IP address of the network destination
Mask/Range
Network destination subnet mask and range
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms You must have a PEFNG license
to configure or view a
netdestination.
Enable or config mode on master
controllers