Release Notes

show rft profile
show rft profile {all|antenna-connectivity|link-quality|raw}
Description
Show parameters for the predefined RF test profiles.
Syntax
Parameter Description
all
Show all predefined profiles.
antenna-connectivity
Show configured parameters for the predefined Antenna Connectivity test
profile.
link-quality
Show configured parameters for the predefined Link Quality test profile.
raw
Show configured parameters for the predefined RAW test profile.
Usage guidelines
The rft command is used for RF troubleshooting, and should only be used under the supervision of Dell
technical support. Issue the show rft profile command to view the profiles used for these RF tests.
Example
The following example shows the testing parameters for the predefined link-quality RF test profile.
(host) #show rft profile link-quality
Profile LinkQuality: Built-in profile
--------------------------------------
Parameter Value
--------- -----
Antenna 1 and/or 2
Frame Type Null Data
Num Packets 100 for each data-rate
Packet Size 1500
Num Retries 0
Data Rate All rates are tried
Related Commands
To view the results of an RF test, use the command show rft result.
Command History
This command was available in ArubaOS 3.0.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show rft profile | 1656