Release Notes

167 | ap mesh-radio-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
ap mesh-radio-profile
ap mesh-radio-profile <profile>
a-tx rates [6|9|12|18|24|36|48|54]
allowed-vlans <vlan-list>
children <children>
clone <profile>
eapol-rate-opt
g-tx rates [1|2|5|6|9|11|12|18|24|36|48|54]
heartbeat-threshold <count>
hop-count <hop-count>
link-threshold <count>
max-retries <max-retries>
mesh-ht-ssid-profile
mesh-mcast-opt
mesh-survivability
metric-algorithm {best-link-rssi|distributed-tree-rssi}
mpv <vlan-id>
no ...
reselection-mode {reselect-anytime|reselect-never|startup-subthreshold|
subthreshold-only}
rts-threshold <rts-threshold>
Description
This command configures a mesh radio profile used by mesh nodes.
Syntax
Parameter Description Range Default
<profile>
Name of this instance of the profile. The
name must be 1-63 characters.
— “default”
allowed-vlans
Specify a list of VLAN IDs that can be used
by a mesh link on APs associated with this
mesh radio profile
<vlan-list>
A comma-separated list of VLAN IDs. You
can also specify a range of VLAN IDs using
a dash (for example, 1–4095)
a-tx rates
Indicates the transmit rates for the 802.11a
radio.
The AP attempts to use the highest
transmission rate to establish a mesh link.
If a rate is unavailable, the AP goes through
the list and uses the next highest rate.
6, 9, 12, 18,
24, 36, 48, 54
Mbps
6, 9, 12, 18,
24, 36, 48, 54
Mbps
children
Indicates the maximum number of children
a mesh node can accept.
1-64 64
clone
Name of an existing mesh radio profile
from which parameter values are copied.
eapol-rate-opt
Use a more conservative rate for more
reliable delivery of EAPOL frames.
enabled
disabled
disabled