Release Notes

1673 | show snmp trap-hosts Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show snmp trap-hosts
show snmp trap-hosts
Description
Displays the configured SNMP trap hosts.
Syntax
No parameters.
Example
The output of this command shows details of a SNMP trap host.
(host) # show snmp trap-hosts
SNMP TRAP HOSTS
---------------
HOST VERSION SECURITY NAME PORT TYPE TIMEOUT RETRY
---- ------- ------------- ---- ---- ------- -----
10.16.14.1 SNMPv2c public 162 Trap N/A N/A
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers