Release Notes

1727 | show upgrade-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show upgrade-profile
Description
The settings in this centralized image upgrade profile allow the master controller to automatically upgrade its
associated local controllers by sending an image from an image server to one or more local controllers.
Syntax
No parameters
Usage Guidelines
The centralized image upgrade feature is enabled and configured on a master controller only, and supports up
to 100 simultaneous image downloads.
Example
(host) (config) # show upgrade-profile
Upgrade Profile
---------------
Parameter Value
--------- -----
Enable software upgrade false
Max downloads 10
Reboot automatically true
Protocol tftp
Server IP address N/A
Username N/A
Password N/A
File path N/A
The output of this command includes the following information:
Parameter Description Range Default
Enable software
upgrade
If true, the centralized image upgrade feature has
been enabled. Note that this feature is disabled by
default.
- Disabled
Max downloads
Maximum number of local controllers that can sim-
ultaneously download a file from a file server. The
centralized image downloading feature supports up
to 100 simultaneous downloads. If this field is left
blank, ArubaOS will use its default value of 10 down-
loads.
1-100 10
Reboot auto-
matically
If true, the local controllers reboot after they download
their new images.
NOTE: If you enable this option, local controllers will
reboot without saving any changes to their current
configuration. If you have any unsaved configuration
changes on your local controller that you want to
retain, do not enable this option.
- Disabled
Protocol
Specify the protocol used to send the software
upgrade from the image server to the local controller.
l TFTP
- TFTP