Release Notes

1805 | show whitelist-db cpsec-local-switch-
list
Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show whitelist-db cpsec-local-switch-list
show whitelist-db cpsec-local-switch-list [mac-address <mac-address>]
Description
Display the list of local controllers with APs using the control plane security feature.
Syntax
Parameter Description
mac-address <mac-address>
MAC address of the local controller whose data you want to view.
Usage Guidelines
When you use the control plane feature on a network with both master and local controllers, the master
controller maintains a whitelist of local controllers with APs using control plane security. When you change a
campus AP whitelist on any controller, that controller contacts the master controller to check the local switch
whitelist, then contacts every other controller on the local switch whitelist to notify it of the change. This allows
an AP to move between local controllers and still stay connected to the secure network.
To view information for a single local controller, use the command show whitelist-db cpsec-local-switch-
list mac-address <mac-address>. To view a list of all local controllers, use the command show whitelist-db
cpsec-local-switch-list.
Example
The following command shows information for all local controllers in the local controller whitelist:
(host) #show whitelist-db cpsec-local-switch-list
Registered Local Switch Details
-----------------------------------
MAC-Address IP-Address Sequence Number Remote Sequence Number NULL Update Count
----------- ---------- --------------- ---------------------- -----------------
00:0b:86:51:a5:4c 10.3.53.2 3 1
0
00:A0:C9:14:C8:29 10.3.53.4 3 0
0
Local Purge Remote Purge Remote Last-Seq Last Update Sent Last Update Received
----------- ------------ --------------- ---------------- --------------------
00 2 Mon May 4 13:33:29 2013 Mon May 4 13:33:18 2013
00 2 Mon May 4 13:32:55 2013 Mon May 4 13:32:19 2013
Whitelist Entries: 2
The output of this command includes the following information:
Parameter Description
MAC-Address
MAC address of the local controller.
IP-Address
IP address of the local controller.