Release Notes

1951 | user-role Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
dpi
Role specific DPI con-
figuration.
— —
disable
Disable role specific DPI
configuration.
— —
max-sessions
Maximum number of
datapath sessions per
user in this role.
0-65535 65535
no
Negates any configured
parameter.
— —
policer-profile
Applies a policer profile to
the user role.
— —
pool
If VPN is used as an
access method, specifies
the IP address pool from
which the user’s IP
address is assigned:
l2tp: When a user
negotiates a Layer-2
Tunneling Protocol (L2TP)
/ IPsec session, specifies
an address pool
configured with the ip
local pool command.
pptp: When a user
negotiates a Point-to-
Point Tunneling Protocol
(PPTP) session, specifies
an address pool
configured with the pptp
ip local pool command.
— —
<name>
Name of the L2TP or
PPTP pool to be applied.
— —
qos-profile
Applies a QOS profile to
the user role.
— —
reauthentica
tion-interval
Interval, in minutes or
seconds, after which the
client is required to
reauthenticate.
l 0-4096 in
minutes
l 0-245760 in
seconds
0(disabled)
session-acl <string>
Session ACL configured
with the ip access-list
session command. You
can specify both IPv4 and
IPv6 ACLs.
— —
ap-group
(Optional) AP group to
which this ACL applies.
— —