Release Notes

Parameter Description Range Default
position
(Optional) Position of this
ACL relative to other
ACLs that you can
configure for the user
role. 1 is the top.
— (last)
sso
Applies an SSO profile to
the user role.
— —
statefule-kerberos
Applies a statefule Ker-
beros profile to the user
role.
— —
stateful-ntlm
Apply stateful NTLM
authentication to the
specified user role
traffic-control-profile <STRING>
Apply the Lync traffic
control priority profile to
the user-role.
NOTE: For the string
value, enter the profile
name that you created
using app lync traffic-
control command.
— —
via
Applies a VIA connection
profile to the user role.
— —
vlan
Identifies the VLAN ID or
VLAN name to which the
user role is mapped. This
parameters works only
when using Layer-2
authentication such as
802.1X or MAC address,
ESSID, or encryption type
role mapping because
these authentications
occur before an IP
address is assigned. If a
user authenticates using
a Layer-3 mechanism
such as VPN or captive
portal this parameter has
no effect.
NOTE: VLAN IDs and
VLAN names cannot be
listed together.
— —
voip-profile
Applies a VOIP profile to
the user role.
— —
web-cc disable
Disable web content clas-
sification for this user role.
User role bandwidth con-
tracts associated with web
content classification cat-
egories and reputation
— —
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide user-role | 1952