Release Notes

1959 | vlan Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
To enable role-based access for wired clients connected to an untrusted VLAN and/or port on the controller,
you must use the wired aaa-profile parameter to specify the wired AAA profile you would like to apply to that
VLAN. If you do not specify a per-VLAN wired AAA profile, traffic from clients connected to an untrusted wired
port or VLAN will use the global wired AAA profile, if configured.
Example
The following command creates VLAN ID 27 with the description myvlan on the controller.
(host) (config) #vlan 27 myvlan
The following command associates the VLAN IDs 5, 12 and 100 with VLAN guestvlan on the controller.
vlan guestvlan 5,12,100
The following command creates VLAN IDs 200-300, 302, 303-400.
(host) (config) #vlan range 200-300,302, 303-400
Related Commands
Command Description
show vlan This command shows a configured VLAN interface number, description and
associated ports
aaa authentication wired This command configures authentication for a client device that is directly
connected to a port on the controller.
Command History
Release Modification
ArubaOS 3.0 Command available.
ArubaOS 3.4 vlan-ids parameter introduced.
ArubaOS 3.4.1 vlan range parameter introduced.
ArubaOS 6.0 wired aaa-profile parameter introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers