Release Notes

197 | ap system-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
rap-dhcp-pool-
netmask
Configures a DHCP pool for remote
APs. This is the netmask used for the
DHCP pool.
—
255.255.255.0
rap-dhcp-pool-
start
Configures a DHCP pool for remote
APs. This is the first IP address of the
DHCP pool.
—
192.168.11.2
rap-dhcp-server-id
IP address used as the DHCP server
identifier.
—
192.168.11.1
rap-dhcp-server-vlan
VLAN ID of the remote AP DHCP server
used if the controller is unavailable.
This VLAN enables the DHCP server on
the AP (also known as the remote AP
DHCP server VLAN). If you enter the
native VLAN ID, the DHCP server is
unavailable.
— —
rap-gre-mtu
Configures the maximum size of the
GRE packets exchanged between a
RAP and the controller.
1024-
1578
bytes
1200 bytes
rap-local-network-access
Enable or disable local network access
across VLANs in a Remote-AP.
— disabled
request-retry-
interval
Interval, in seconds, between the first
and second retries of AP-generated
requests. If the configured interval is
less than 30 seconds, the interval for
subsequent retries is increased up to
30 seconds.
1-65535 10 seconds
rf-band
For APs that support both a and b/g RF
bands, RF band in which the AP should
operate:
l g = 2.4 GHz
l a = 5 GHz
a/g g
rtls-server
Enables the AP to send RFID tag
information to an RTLS server.
— —
ip-or-dns
IP address or the DNS of the RTLS
server to which location reports are
sent.
— —
port
Port number on the server to which
location reports are sent.
— —
key
Shared secret key. — —
station-message-frequency
Indicates how often packets are sent to
the server.
1-3600 30 seconds
include-unassoc-sta
RTLS station reporting includes inform-
ation for APs and the clients that the AP
has detected. If you include
theinclude-unassoc-sta parameter,
— disabled