Release Notes

Parameter Description Range Default
the station reports will also include
information about clients not associated
to any AP. By default, unassociated cli-
ents are not included in station reports.
session-acl
Session ACL configured with the ip
access-list session command.
NOTE: This parameter requires the
PEFNG license.
— —
spanning-tree
Enables the spanning-tree protocol. — disabled
syscontact
SNMP system contact information. — —
telnet
Enable or disable telnet to the AP. — disabled
Usage Guidelines
The AP system profile configures AP administrative operations, such as logging levels.
Example
The following command sets the LMS IP address in an AP system profile:
(host) (config) #ap system-profile local1
lms-ip 10.1.1.240
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Support for additional RTLS servers and remote AP enhancements was
introduced.
ArubaOS 3.3.2 l Maintenance-mode parameter was introduced.
l Multiple remote AP DHCP server enhancements were introduced.
l Support for RFprotect server and backup server configuration was
introduced.
l The mms-rtls-server parameter was deprecated in ArubaOS 3.3.2.
ArubaOS 5.0 The master-ip, rfprotect-server-ip and rfprotect-bkup-server parameters
were deprecated.
ArubaOS 6.0 Added support for the option to set the RF scanning band (am-scan-rf-band).
The keepalive-interval parameter was deprecated.
ArubaOS 6.2 The default number of IPsec retries defined by number_ipsec_retries was
reduced from 360 to 85.
ArubaOS 6.2.1.3 The root-ap parameter was deprecated. This parameter identifies the root AP in
a hierarchy of Remote APs.
ArubaOS 6.3 l The aeroscout-rtls-server include-unassoc-sta parameter was introduced.
l The spanning-tree and heartbeat-in parameters were introduced.
l The rtls-serverip and aeroscout-rtls-server ip parameters were modified
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide ap system-profile | 198