Release Notes

To specify a different server certificate, use the no command to revert back to the default certificate before you
specify the new certificate:
(host) (config) #web-server mgmt-auth certificate
switch-cert ServerCert1
no switch-cert
switch-cert ServerCert2
Command History
Version
Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.1 The mgmt-auth parameter was introduced.
ArubaOS 3.2 The captive-portal-cert parameter was introduced.
ArubaOS 6.3
The following new parameters are introduced:
l web-https-port-443
l web-lync-listen-port
ArubaOS 6.3.1
Under the web-lync-listen-port, the following two parameters are
introduced:
l http
l https
ArubaOS 6.4 The idp-cert parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms The web-server ciphers and
web-server ssl-protocol
commands require the PEFNG
license
Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide web-server | 1988