Release Notes

1989 | whitelist-db cpsec add Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
whitelist-db cpsec add
whitelist-db cpsec add mac-address <mac-address>
state {approved-ready-for-cert|certified-factory-cert} cert-type {switch-cert|factory-cert}
[description <description>]
Description
Add an AP entry to the campus AP whitelist.
Syntax
Parameter Description
mac-address <mac-address>
MAC address of the AP you want to enter into the cpsec whitelist
database.
state
Select one of the following AP states:
l approved-ready-for-cert: The AP has been approved as a valid AP
and is ready to receive a certificate.
l certified-factory-cert: The AP is already has a factory certificate.
APs in this state will not be re-issued a new certificate if control
plane security is reenabled.
cert-type
Identify the type of certificate to be used by the AP.
l switch-cert: AP is using a certificate signed by the controller.
l factory-cert: AP is using a factory-installed certificate.
description
(Optional) Enter a brief description of the AP. If the description includes
spaces, you must enclose the description in quotation marks.
Usage Guidelines
You can manually add entries to the campus AP whitelist to grant valid APs secure access to the network.
Example
The following command creates a new campus AP whitelist entry for an AP with the MAC address
00:16:CF:AF:3E:E1:
(host) (config) #whitelist-db cpsec add mac-address 00:16:CF:AF:3E:E1
state certified-factory-cert
cert-type factory-cert
description "A legacy AP model, apname AP-corp22"
Related Commands
Command Description Mode
show whitelist-db cpsec
Show the campus AP whitelist for the control plane
feature.
Enable mode