Release Notes

Parameter
Description Range Default
rpt-condtion <rpt-condition>
This option is used to indicate the
value for the "Reporting
Condition" field in the Beacon
Reporting Information sub-
element present in the Beacon
Report Request frame.
0 - 255 0
rpt-detail
This option is used to indicate the
value for the "Detail" field in the
Reporting Detail sub-element
present in the Beacon Report
Request frame.
— Disabled
ssid <ssid>
A unique character string
(sometimes referred to as a
network name), consisting of no
more than 32 characters. The
SSID is case-sensitive (for
example, WLAN- 01).
— —
Usage Guidelines
The Beacon Report Request profile is configured under the 802.11K profile.
Example
The following commands configure the parameters under the bcn-rpt-req-profile.
(host) (config) #wlan bcn-rpt-req-profile default
(host) (Beacon Report Request Profile "default") #channel 9
(host) (Beacon Report Request Profile "default") #interface 1
(host) (Beacon Report Request Profile "default") #no measure-dur-mandatory
(host) (Beacon Report Request Profile "default") #measure-duration 100
(host) (Beacon Report Request Profile "default") #measure-mode active-all-ch
(host) (Beacon Report Request Profile "default") #random-interval 100
(host) (Beacon Report Request Profile "default") #reg-class 12
(host) (Beacon Report Request Profile "default") #rpt-condition 2
(host) (Beacon Report Request Profile "default") #no rpt-detail
(host) (Beacon Report Request Profile "default") #request-info 0/21/22
(host) (Beacon Report Request Profile "default") #ssid aruba-ap
Command History
This command is introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Configuration mode on master and local
controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide wlan bcn-rpt-req-profile | 2012